Equipment Listings - Pulp Mill Equipment

NEW EQUIPMENT

Advertise or Browse Pulp Mill Equipment

• Deinking Equipment
  • IEC# 119361 - 240TPD De-Inking Plan mfg. Andritz / Fiberprep in 1996. This unit has a Waste Furnish: 70% ONP (Used Newsprint) and 30% Magazine, with an average production rate of 190 BDMTPD •• (1) HD Pulper, Fiberprep, Model 35m3, Average Consistency 12 to 15%,...
    For Information...

• Bleach Plant Components
  • IEC# 117629 - 40 BD tons/day Bleach Plant. 2-Stage process using Oxygen, Chlorine, Chlorine Dioxide and Ozone as bleaching agents. Some of the major components include: - Screened brown stock pump with 20 HP motor - Impco vacuum pulp filter/washer - Decker...
    For Information...
  • IEC# 117633 - Chlorine Generation Plant, 36 STPD, Complete Plant, new in mid 1990's. Excellent condition. Mfg. Albright and Wilson. Still installed, offered as-is where-is.
    For Information...
  • IEC# 117636 - Chlorine Pump, Lawrence 18" Inlet Pump, 17.12" diameter rotor, left hand, 125 HP motor included.
    For Information...

• Cranes and Hoists
  • IEC# 117637 - Liebherr 30 ton barge crane. It has a reach of 100 feet and was manufactured in 1998.
    For Information...

• Fourdrinier Machines
  • IEC# 117634 - 6.0 Meter trim Pulp machine may be used as basis for pulp or paper machine. Fourdrinier- Stainless steel clad, cantilevered, 6 meter wire width, 17 meters breast roll to couch. Breast roll(roll down), forming box, plain foils suction foils and...
    For Information...

• Washer Drums
  • IEC# 117635 - Impco 3.5 Meter Diameter by 6.1 Meter length. 317L Stainless Steel Bleach Washer Drum.
    For Information...

• Wet Lap Machines
  • IEC# 117631 - COMPLETE 200 TPD, 2.59 Meter trim Wet Lap Machine with Cutter Layboy. Includes 2.59 Meter width, 3.0 Meter diameter Cylinder. Two(2) Sandy Hill presses with 711mm diameter rolls.
    For Information...